Summary Details: This imposing wooden climbing frame is similar to the arundel twin wooden climbing frame but offers two larger platforms 120cm 4ft x 90cm 3ft and a climbing rope on the end of the swing arm. The two towers connect via a 1.6m 63 long clatter bridge, or can ...
Read more about this item under the full details tab below.
- Normal Retail Price:£1249.00
- Voucher or Offer Value£0.00
- Price:£1249.00
- Delivery or Postage:see website
- Total Cost:£1249.00
Mowers Online - With our fantastic range of ride on toys from Caterpillar, JCB and John Deere children will have great fun helping in the garden with trailers, tractors and excavators. We also have a range of giant outdoor games and wooden climbing frames.
This imposing wooden climbing frame is similar to the arundel twin wooden climbing frame but offers two larger platforms 120cm 4ft x 90cm 3ft and a climbing rope on the end of the swing arm. The two towers connect via a 1.6m 63 long clatter bridge, or can be upgraded to a carrisbroke climbing frame wooden tunnel. Access to the climbing frame towers is via the wide wooden staircase, up the wooden rungs or using the 8 rung by 4 strand commando net. Depending on your garden layout, the swing arm, commando net and 3m 10ft wavy green slide may be positioned off the two towers in a variety of ways. Beneath one of the towers is a sandpit with seats for little children. Climbing frame package includes 2 x climbing frame towers double wooden swing frame cargo net 2 x wooden swing seats 3m slide clatter bridge wooden staircase wooden sandpit with seats wooden platform railings specification platform size1.2m x 0.9m 47 x 36 x two platform height 1.5m 59 overall dimensions and length of swing arm3.9m x l8.23m 324 x l153 overall height 3.1m swing arm height 2.65m 104 tower dimensions 1.2m x 0.9m x 3.1m 47 x 36 x 122 x two platform access wooden stairs wooden rungs commando net slide dimensions 3.0m 118 build time approximately 6 to 8 hours general information selected top grade pine from forests approved and managed under the pefc scheme and which is seasoned, machined, planed smooth with rounded edges. All fixing holes and nut recesses are drilled, then the timber is pressure treated using a non toxic solution approved for chilren's playground equipment. Included with each product are all necessary fittings galvanised or stainless steel, fasteners, ropes, a detailed set of assembly instructions and even a drill bit for preparing screw holes. The galvanised swing hangers have low noise nylon bearings, and bolt through the swing arm beam. Stability is provided by both the design and utilising spiralock ground anchors with easy drive fitting. Delivery, installation, and assembly before purchasing of installing your playcentre, measure your garden. An unobstructed safety area of about 1.5m should be left for access and safety, with a clear zone of about 2.5m in front and behind the swings. All sections of your playcentre are delivered flat packed in manageable components. Delivery before signing for your delivery, please check that you have received all the components to build your playcentre and that none of the packages are damaged or open. Packages are labelled 1 9, 2 9 etc for easy checking. If you are unsure, please sign 'damaged' or 'missing' and cross out the line 'received in good condition' if there is any discrepancy. You should then contact us immediately on 01452 616169. We recommend two or more people for assembling the playcentre. You may find it easier to make up the tower components horizontally before raising them upright. You will need some tools for the assembly. In particular, 13mm and 17mm box or socket spanners, a drill with phillips driver, level and tape measure. Note wood is a natural product and as such is subject to the moisture content of the air and ground. Sometimes cracks or splits may appear, but this will not result in weakening of structural stability. Warranty all playcentre products carry a 10 year guarantee against rot and insect infestation on all timber sections.





